WTB: Stem / Saddle / Track drops

Looking for...

- A 1" (or 1 1/8" with 1" shim) stem with a 26mm clamp. Less than 100mm in length, with around a 5-10 degree rise/drop.

- A saddle that's in good condition. No specific preference, just wanna see what you guys got out there.

- Track drops; 26mm or 25.4 mm clamp is fine, nothing wider than 40cm.

let's see what ya got!

Daryl_barsomething is selling his Selle Itialia Turbo for $20 I believe message him

Sorry to be a stickler, but unfortunately it's not possible to shim a 1 1/8" down to 1".

Your only bet with a Kilo is a 1" stem.

Mandrew wrote:

Daryl_barsomething is selling his Selle Itialia Turbo for $20 I believe message him

Nice! for $20 I'll be glad to take it. Good lookin' out brother

Paulo wrote:

Sorry to be a stickler, but unfortunately it's not possible to shim a 1 1/8" down to 1".

Your only bet with a Kilo is a 1" stem.

Really? I've seen some 1 1/8" threadless stems that come with shims to fit on 1" tubes...

Sheldon Brown: "1 inch threadless stems are a bit of an endangered species; the usual answer is to use a 1 1/8" stem with a shim. That's perfectly safe, but a bit kludgy."

unless my brain isn't functioning properly and i'm not understanding something the right way

Trem wrote:

Mandrew wrote:

Daryl_barsomething is selling his Selle Itialia Turbo for $20 I believe message him

Nice! for $20 I'll be glad to take it. Good lookin' out brother

Paulo wrote:

Sorry to be a stickler, but unfortunately it's not possible to shim a 1 1/8" down to 1".

Your only bet with a Kilo is a 1" stem.

Really? I've seen some 1 1/8" threadless stems that come with shims to fit on 1" tubes...

Sheldon Brown: "1 inch threadless stems are a bit of an endangered species; the usual answer is to use a 1 1/8" stem with a shim. That's perfectly safe, but a bit kludgy."

unless my brain isn't functioning properly and i'm not understanding something the right way

Oh shit, you're right. It's my brain that isn't functioning right (I'm in the middle of studying for finals). I think I was thinking the other way around (shimming a 1 1/8" steer tube to fit a 1" stem). Haha.

Carry on.